Extra thick manifold washer for use with brass manifold nuts. Part # 12A1211

LOCATION PLATE R/H GAS TANK 21A1329 Platform that sits in the boot floor for the r/h extra tank to sit on.

Long brass manifold nut. Part # 51K1177. See GFK3436 for the shorter version.

Big Bore 52mm throttle body for Multi Point Injection Classic Minis. Larger than the stock 48mm plastic version this cast metal unit will provide better performance and reliabilty whilst also allowing full throttle opening not available on the standard unit. Direct replacement for the stock throttle body without mods. ECU mods may be performed with this unit for even more power. Genuine SU product. Twin Point Minis only. Installation instructions included. This is a special order item only. Please email sales@gbcarparts.com for ordering info.

ADU5065 Choke Cable Clip 87-91 models

Standard Mini Fuel Cap - fits Mini, carb & SPI- Non vented, non locking. Part # WLD10027. Genuine Rover.

Modern high lift, short duration camshafts have posed quite a few problems for the general public in recent years. Widely available performance valve springs were outdated overnight, as it became necessary to reduce spring crush. This, in turn, caused low valve seat pressures creating valve float at high rpm. Mini Spares has massively simplified these problems by introducing a small range of springs that covers all eventualities. Manufactured from super quality silicone wire imported from Switzerland, their resistance against fading and breaking is extremely high. They are also designed to take standard type top caps. They can be fitted directly to the head with no fear of spring crush. 280lb Dual springs for race use up to 8000 rpm and .570 lift. The standard fitted length of springs is 1.4" - 1.42". Spacer shims are available to increase valve seat poundage and overall spring rate. If the spring or valve seats in the head have already been machined, it will be necessary to re-shim to the correct fitted length. C-AEA527

Service kit for a single or left/front SU HS2 1.25" carb. Includes Gaskets, Needle & Seat and Jet Assembly. Instruction sheet and diagram included.

Service kit for a single SU HS4 1.5" carb. Includes Gaskets, Needle & Seat and Jet Assembly. Instruction sheet and diagram included.

Carb service kit for HS4 carbs with Waxstat type jet (1980+ models) Includes Gaskets, Needles and Seat and WAXSTAT Jet Assembly. Instruction sheet and diagram included.

Service kit for the following HIF6 & HIF44 (except Turbo)carbs: FZX1306, FZX1307, FZX1280, FZX1281, FZX1409, FZX1412, FZX1429, FZX1433, FZX1462, FZX1524, FZX1526, FZX1525, FZX1531, FZX1469, FZX1312, FZX1366, FZX1422, FZX1428, FZX1443, FZX1468, FZX1529, FZX1419. Instruction sheet and diagram included.

Fuel Filter Classic Mini 1.3 MPI from chassis number 169574 Unipart # GFE7057

Applications for part WF8160 Make Model Engine LOTUS ELISE K1.8WC ROVER GROUP MINI 12A2B ROVER GROUP MINI 12A2D ROVER GROUP MINI 12A2E

Fuel filter for Suzuki samurai (carb models0 Applications for part WF8147 Suzuki # 15410-80000 Make Model Engine SUZUKI CARRY F10A SUZUKI CARRY F8A SUZUKI SAMURAI F10A SUZUKI SAMURAI G13A SUZUKI SAMURAI G13B SUZUKI SANTANA F10A SUZUKI SJ410 F10A SUZUKI SJ413 G13A SUZUKI SUPER CARRY F10A

SRacer Classic Mini Stainless Steel Fuel Pump blanking cover plate in thick stainless steel.

Mechanical fuel pump gasket. CAM6657