Impact Socket for A+/Verto Flywheels. See Tool03 for the early type of flywheel socket. Make life easier, get the right tool!

Impact Socket for A series (pre A+/Verto) Flywheels and all swivel pin (ball joint) retaining nuts. See Tool13 for the Verto flywheel socket. Make life easier, get the right tool!

Clamp tool for rubber brake hoses. Perfect for stopping brake fluid draining whilst you change brake cylinders or calipers.

Flywheel puller tool for Classic Minis

Two part primary gear oil seal tool, (known as clutch seal tool). It includes the sleeve that slides over the primary gear to protect the seal membrane on the gear splines, plus the outer body that pushes the seal home square. This is achieved by using the flywheel bolt in the end and tightening.

Tool for removing external door hinge bushings

Haynes Restoration Manual for Classic Minis from 1959 to 2001. includes renovation and repair info on bodywork, painting, mechanical, electrical, interior, engine swaps, performance, wheel swaps and even what to look for when buying a Mini

Haynes superb Mini Service & Repair Manual. Latest edition covers Minis from 1969 to 2001. THE book for all your service and repair needs.

Haynes superb Mini Service & Repair Manual. Covers Minis and variants from 1959 to 1969. THE book for all your service and repair needs on early Minis.

Haynes Restoration Manual for Morris Minor and Morris 1000. Includes renovation and repair info on bodywork, painting, mechanical, electrical, interior, modifications, performance, wheel swaps and even what to look for when buying a Morris Minor or Morris 1000

The Haynes carburettor Techbook, covers SU (H, HD, HS & HIF), Weber (DAF, DCD, FDA, DFD, DFE, DFT, DGV, DIF, IDA, IDS, IDT, DCNF, DCOE, DFAV, DFTA, DGAS, IDAP & IDTP) and Zenith Stromberg (CD, CDS, etc.). Excellent manual with easy to follow step-by-step procedures and lots of illustrations. Includes theory and operation, maintenance and tune-up, detailed overhaul procedures and application and reference tables.

Suspension tool used for removing and replacing the rubber cone springs or when replacing them with steel springs. This tool is for Metric only. For post 1976 Minis and springs that have been replaced since 1976. May vary slightly in appearance depending on manufacturer.

This tool is required to compress the rubber cone spring on all Classic Minis. Early cars upto 1976 use standard thread and later cars use Metric thread. This tool does both. May vary slightly from photo depending on manufacturer.

Multi bit tool for installing windshield fillers on Minis and many other glass seals on all your classic cars

Tuning The A Series Engine by David Vizard. Published by Haynes. The authoritative book on A series engines. Click on this link for more detailed photos