1.5 Roller rocker assembly. 1.5 Hi-Lift with roller tips. Improves efficiency and performance. Superb full Roller Tip Rocker set from Minisport UK Can be used on small bore engines if rockers are rearranged but not suggested for 850cc. Part # C-AHT446, see C-AHT446A for the less expensive set without spacers etc.

1.5 Roller rocker set. 1.5 Hi-Lift with roller tips. Improves efficiency and performance. Superb full Roller Tip Rocker set from the UK for 1275 and larger engines. Can be used on small bore engines if rockers are rearranged. Your existing spacers/springs must be reused with this set. Part # C-AHT446A see C-AHT446 for the complete already assembled set.

123 Electronic Distributor Assembly - with selectable advance curves for A+, with vacuum advance -Special order only, email sales@gbcarparts.com for availability

123 Electronic Distributor Assembly - with selectable advance curves for A+, without vacuum advance -Special order only, email sales@gbcarparts.com for availability

123 Electronic Distributor Assembly - with selectable advance curves for pre A+ engines, with vacuum advance -Special order only, email sales@gbcarparts.com for availability

123 Electronic Distributor Assembly - with selectable advance curves for pre A+ engines, without vacuum advance -Special order only, email sales@gbcarparts.com for availability

Side Tappet Chest bolt seal 12A1176. See 12A1175 for the gasket.

Extra thick manifold washer for use with brass manifold nuts. Part # 12A1211

12A2035 oil filter housing gasket

Classic Mini 2 core polished aluminum light weight high efficiency Classic Mini radiator with drain plug. Reinforced side mounts for extra strength. Can be used on all Minis prior to 1989 (or up to MPI if you don't need the electric fan switch), Mk1 cars will require shroud modifications if they still have the original shroud. Radiator cap also included. Also available with the fan switch for 91+ carb and SPI models. Dimensions 2+5/8" thick, 14+1/4" high (add 1" for the neck), 11+3/8 wide Hose connectors are 1" diameter

Classic Mini 2 core polished aluminum light weight high efficiency Classic Mini radiator with electric fan temperature switch. Reinforced side mounts for extra strength. Can be used on all Minis prior to MPI/Twin Point as it includes the radiator fan sensor required on 1990+ models, Mk1 cars will require shroud modifications if they still have the original shroud. Radiator cap also included. Also available without the switch. Dimensions 2+1/2" thick, 14+1/4" high (add 1" for the neck), 11+3/8 wide Hose connectors are 1" diameter

Classic Mini 2 Core Supercool Radiator. This radiator is great for hot climates and will keep your engine running cooler. It is especially suited for larger & more powerful engines but is not suggested for off road use. Add a "Tropical Fan" for extra cooling performance. Mk1/2 two piece fan shrouds may require slight modification. Part # C-ARA4442

Metal sleeve for the upper engine steady bar bushings. Part # 21A1108. Can be used with Superflex poly bushing sets and others.

Sracer Upgraded & anodized 21A2387 upper stabilizer bracket

LH Engine/motor mount for Mini Automatic transmission models. Qty 1.